Author: britrifles
Subject: New brass
Posted: July 03 2020 at 2:48pm
I will typically neck size new brass to be sure the case necks are consistent and round. Sometimes you will see deformed mouths, dings, etc. Then inside chamfer the mouth and uniform primer pocket depth.
Subject: New brass
Posted: July 03 2020 at 2:48pm
I will typically neck size new brass to be sure the case necks are consistent and round. Sometimes you will see deformed mouths, dings, etc. Then inside chamfer the mouth and uniform primer pocket depth.
F/L sizing is also fine, but I have not had the need to do so (chambers will most likely be larger than the new cases). Agree with Shamu, don’t trim, unless you are particular about having a uniform case length.