Author: Dragunov
Subject: IMR's SR4759 and the .303
Posted: December 30 2021 at 8:23am
Thanks SW. I have 1/2 of a 1 pound can and an unopened 5 LB left over from my Schuetzen days. I am hoping that later this afternoon I will have a bit of free time to do some casting. I have found from previous orders that Accurate Molds is a first class operation to deal with. Both of my mold cavities were a variation of what they currently offer. The proprietor has no issue with increasing or decreasing diameters to suit you. Mine (the 180 and a 155 gr) were originally. 30-30 designs (I believe) expanded up to .314 diameter. Both are planned as paper-punchers and mild (read: old guy) critter-getters.
Subject: IMR's SR4759 and the .303
Posted: December 30 2021 at 8:23am
Thanks SW. I have 1/2 of a 1 pound can and an unopened 5 LB left over from my Schuetzen days. I am hoping that later this afternoon I will have a bit of free time to do some casting. I have found from previous orders that Accurate Molds is a first class operation to deal with. Both of my mold cavities were a variation of what they currently offer. The proprietor has no issue with increasing or decreasing diameters to suit you. Mine (the 180 and a 155 gr) were originally. 30-30 designs (I believe) expanded up to .314 diameter. Both are planned as paper-punchers and mild (read: old guy) critter-getters.