Author: Bullet Smith
Subject: IMR's SR4759 and the .303
Posted: January 09 2023 at 5:39pm
I am finishing up an eight lb keg of SR4759. With a gas checked, 215 grain bullet from the Lyman 314188? mold, I use 18 grains of 4759 with a small square of Dacron to hold the powder in position.
Subject: IMR's SR4759 and the .303
Posted: January 09 2023 at 5:39pm
I am finishing up an eight lb keg of SR4759. With a gas checked, 215 grain bullet from the Lyman 314188? mold, I use 18 grains of 4759 with a small square of Dacron to hold the powder in position.
This load also works well with my .314”, 170 grain paper patched loads.