Author: Goosic
Subject: Inside neck reaming...
Posted: January 22 2024 at 6:40pm
My 243W cases that are necked down and F/L resized 7.62x51mm Lake City brass, I can see where inside neck reaming would greatly benefit me. The 90grn OTM Scenar-L BTHP projectiles protrude well past the neck/shoulder area.
Subject: Inside neck reaming...
Posted: January 22 2024 at 6:40pm
My 243W cases that are necked down and F/L resized 7.62x51mm Lake City brass, I can see where inside neck reaming would greatly benefit me. The 90grn OTM Scenar-L BTHP projectiles protrude well past the neck/shoulder area.
My 7.62x51mm Lake City brass that has been Full Length resized will need to have the neck reamed eventually. My 180grn Norma Vulkan Flatbased projectiles protrude past the neck/shoulder area as well.
The 170grn FMJ-BT M30 projectiles that I will be using along with the 174grn FMJ-BT projectiles that are made by the same manufacturer do not protrude into the case enough to cause an issue however...