Author: slowindown
Subject: Reloading 303 with crimp
Posted: February 04 2024 at 10:01am
So, instead of messing with the whack-a-mole loader I did go ahead and cut the de-capping pin from the mandrel for the Lee neck sizing die (and ordered another one). I pulled the bullets with an rcbs collet puller, resized the necks and reloaded. The bullets are nice and tight now.
![]()
Subject: Reloading 303 with crimp
Posted: February 04 2024 at 10:01am
So, instead of messing with the whack-a-mole loader I did go ahead and cut the de-capping pin from the mandrel for the Lee neck sizing die (and ordered another one). I pulled the bullets with an rcbs collet puller, resized the necks and reloaded. The bullets are nice and tight now.
And as previously mentioned, I put the smaller expander in my full length die for when I prep some more of the once fired hxp brass I have.
