Author: Zed
Subject: R-P brass
Posted: May 09 2016 at 1:19pm
I'll second the fact that RP brass is not great! and getting worse!
Subject: R-P brass
Posted: May 09 2016 at 1:19pm
I'll second the fact that RP brass is not great! and getting worse!
My No4Mk1/2 has a No3 head and head space is just on the NO-GO 0,067" thou. I inspect the brass after every firing and trim, anneal etc.
But recently I've had a batch of RP that split lengthways down the neck, because it's so thin (when compared to PPU).
Also had a case fall in two as the classic seperation; but ejected ok, it fell apart as I picked it up afterwards.