Author: 25-5
Subject: So spray case lube won't contaminate.
Posted: January 11 2016 at 1:46pm
I have been using one shot for a couple of years. Since it was a spray, and now it's aerosol. It is a big time saver. I have never had a problem. Lots & lots of .303, .30-06, .243, and .308. Stand them up on a cardboard about an inch and a half apart. Spray down at about 60 degree angle. Rotate 180 and spritz again.
Subject: So spray case lube won't contaminate.
Posted: January 11 2016 at 1:46pm
I have been using one shot for a couple of years. Since it was a spray, and now it's aerosol. It is a big time saver. I have never had a problem. Lots & lots of .303, .30-06, .243, and .308. Stand them up on a cardboard about an inch and a half apart. Spray down at about 60 degree angle. Rotate 180 and spritz again.
I dry tumble then size and deprime and wipe the cases on the outside. After completing the rest of the brass tasks there is a big time lapse since I prepare a few hundred, maybe even the next day before loading.
The .303's don't get as heavy a dose since I neck size, but ammo for the M1A and Garand is a different story.
After seeing what you found I will certainly keep a close watch on what I am doing.
I use Varget and H4895 powders and CCI primers.