Reloading .303 British : Lead projectiles ???
Author: White RhinoSubject: Lead projectiles ???Posted: December 25 2015 at 11:49pmI like this !!!!
View ArticleReloading .303 British : Tight loads in No. 4
Author: Gun Nut 4Subject: Tight loads in No. 4Posted: December 26 2015 at 4:08amYour No.4 Mk I, isn't Canadian made by chance? I can't help wondering what became of the surplus of .303 barrels that...
View ArticleReloading .303 British : 303 to 308
Author: Gun Nut 4Subject: 303 to 308Posted: December 26 2015 at 7:32amI assume you must have a .303 with quite a tight bore i.e. .311". I've heard of people using .308 in a .303 but they have to be...
View ArticleReloading .303 British : 215gr heads
Author: Gun Nut 4Subject: 215gr headsPosted: December 26 2015 at 7:59amThe original ammunition for the .303 British had a 215 gr full metal jacket bullet. I suspect the sporting soft points may have a...
View ArticleReloading .303 British : sub sonic loads for 303
Author: Gun Nut 4Subject: sub sonic loads for 303Posted: December 26 2015 at 8:17amWhat exactly are you up to? Sub-sonic bullets are usually pretty low energy, they would do little more than wound an...
View ArticleReloading .303 British : sub sonic loads for 303
Author: ShamuSubject: sub sonic loads for 303Posted: December 26 2015 at 8:53amI doubt he's listening any more that last post is 5 years old.
View ArticleReloading .303 British : sub sonic loads for 303
Author: Gun Nut 4Subject: sub sonic loads for 303Posted: December 26 2015 at 2:38pmI guess i'll have to pay more attention to dates. Just that the post caught my attention as being a bit strange.
View ArticleReloading .303 British : sub sonic loads for 303
Author: ikesdadSubject: sub sonic loads for 303Posted: December 26 2015 at 4:49pmA lot of culling needs to be done in that country and not necessarily limited to impala.
View ArticleReloading .303 British : fire former
Author: Gun Nut 4Subject: fire formerPosted: December 28 2015 at 3:57amthe only crappy part is having to tighten the four bolts and loosen them back off. i may make a short barrel that threads into a...
View ArticleReloading .303 British : sub sonic loads for 303
Author: db_tankerSubject: sub sonic loads for 303Posted: January 02 2016 at 6:08pmnecro post :) lolI was going to suggest a good dose of Trailboss combined with a 140-150 grain cast gc'd bullet. I...
View ArticleClik here to view.
Reloading .303 British : So spray case lube won't contaminate.
Author: ShamuSubject: So spray case lube won't contaminate.Posted: January 11 2016 at 12:10pmResurrecting this old thread with new info.UPDATED.It ain't the lube, folks its the powder / case...
View ArticleReloading .303 British : So spray case lube won't contaminate.
Author: White RhinoSubject: So spray case lube won't contaminate.Posted: January 11 2016 at 1:04pmIm wondering, Sgt Deshotel is loading some 45/70 pills with a powder that will not light off when...
View ArticleReloading .303 British : So spray case lube won't contaminate.
Author: 25-5Subject: So spray case lube won't contaminate.Posted: January 11 2016 at 1:46pmI have been using one shot for a couple of years. Since it was a spray, and now it's aerosol. It is a big...
View ArticleReloading .303 British : So spray case lube won't contaminate.
Author: W.R.BuchananSubject: So spray case lube won't contaminate.Posted: January 11 2016 at 3:22pmShamu: H335 is for top end loads as it needs pressure to burn correctly. Kind of like H110 doesn't...
View ArticleReloading .303 British : So spray case lube won't contaminate.
Author: ShamuSubject: So spray case lube won't contaminate.Posted: January 11 2016 at 4:42pmThat was my thinking also. If you look at the images way back at the beginning of P1 you can see the primer...
View ArticleReloading .303 British : tumbling loaded rounds
Author: danekoSubject: tumbling loaded roundsPosted: January 16 2016 at 2:58pmHave a bunch of 40s mark 7 they shoot fine , but I need to steel wool them to clean them up. wondering if the vibrator...
View ArticleReloading .303 British : tumbling loaded rounds
Author: Gun Nut 4Subject: tumbling loaded roundsPosted: January 16 2016 at 4:29pmI don't use a tumbler, I work this a rotatory wire brush ( the ones that face downward from the hub) in the drill press.
View ArticleReloading .303 British : tumbling loaded rounds
Author: A square 10Subject: tumbling loaded roundsPosted: January 16 2016 at 6:19pmi would not tumble - i would hand clean , but i always er on the side of caution ,
View ArticleReloading .303 British : tumbling loaded rounds
Author: ikesdadSubject: tumbling loaded roundsPosted: January 16 2016 at 7:06pm^^^ What he sez
View ArticleReloading .303 British : tumbling loaded rounds
Author: hybridfiatSubject: tumbling loaded roundsPosted: January 16 2016 at 8:54pmI have put 150 MkVII rounds in a case polisher (tumbler?). It is by far and away the safest option if you consider the...
View Article